| |||||||||||||||||||||||||||||||
AT42 Portable Single-Channel Temp
AT42 TEMP Features
Easy-to-UseAll AT42 TEMP features are AT YOUR FINGERTIPS. A press of the desired button will change control settings, record or display session data, or select a feedback option. Exclusive TPIThe AT42 TEMP is the only portable temperature feedback instrument with time period integration (TPI). The TPI feature allows a selectable rate of temperature feedback to the patient. It can provide the absolute temperature in real-time -- or the mean temperature every 1.0, 2.0, 4.0, 10.0 or 60.0 seconds. TPI values, along with the session mean from the AT42 TEMP's Statistics feature, can be used to DEMONSTRATE IMPROVEMENT both within each session and from session to session.
| ||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
Visual Feedback |
|
| Display Options | Numerical LED + Lightbar, Lightbar only, Numerical LED only, A/B Ratio |
| Numerical LED Displays | Three red digits, 0.5" high |
| Numerical LED Range | 32 - 113º F, 0 - 45º C |
| TPI (Time Period Integration) Settings | 0.5, 1.0, 2.0, 4.0, 6.0, 10.0, 60.0 seconds |
| Lightbar | 10 red segments |
| Lightbar Scale Factor | 0.1, 0.01º F or C |
Audio Feedback |
|
| Tones | Melodic piano, Percussive piano, tone, Ten tone, and Bi-tone |
| Volume | Levels 0 to 7, 4 is the default |
| Audio Provided | Continuously, Above or Below Threshold |
Statistics |
|
| Statistics Acquired | Min., Max., Mean, SD |
| Sampling Capacity | 525,000 data points per session |
Electrical |
|
| Resolution | 0.01º F, 0.01º C |
| Accuracy | ±0.3º F |
| Sampling Rate | 8 Hz (every 0.125 seconds) |
| Leakage Current | In compliance with UL 2601 specifications |
| Audio Output | 3.5 mm stereo earphone jack, (mono output) |
| Analog Output | Linear 0-3 volt DC signal, compatible with most computer interfaces |
| Line Power Input | 120 volt, 60 HZ, 220 volt, 50/60 Hz |
| Battery Rating | 10 to 12 hours continuous use |
| Battery Recharge | 16 hours maximum with built-in overcharge protection |
| Dimensions & Weight | 2.5"H x 7.7"W x 5.3"D; 1 pound 5 ounces |
Qty. |
Item |
(1) |
UL listed isolation adapter |
(4) |
Installed Ni-Cad rechargeable batteries |
(1) |
6-foot TEMP sensor cable |
(1) |
Roll thermistor tape |
(1) |
Carrying case |
(1) |
Owners manual |
$829 (if you are in a country requiring 220 volt add $20.)
shipping in the US $25. Outside the US, contact us with your full address information so we can give you an exact shipping price.